Rotary paddle level sensor SOLIBA PRP with plactic housing is used to detect a high or low level of bulk products in storage silos, hoppers and containers.
Placed on a hopper or silo, the SOLIBA PRP rotary paddle level sensor is rotated by a motor.
The operation mode of the rotary paddle level sensor SOLIBA PRP is simple. When the paddle is covered with the bulk product, the rotation is stopped, the signal is cut and gives the signal that the level is reached. When the level of the bulk product decreases, the paddle is released, the signal is restored and the engine restarts to fill the silo or the hopper.
The different types of paddle or process connection make it possible to adapt to the tanks and the products to be detected according to the density of the product.
The rotary paddle level sensor SOLIBA PRP can also be used as an intermediate level to detect a given level. For the low level, we recommend using with the rotary paddle level sensor SOLIBA PRP, an aluminum reinforcement flange for better durability over time.
The rotary level indicator SOLIBA PRA operates by rotation, only in non ATEX area. The rotary paddle level sensor SOLIBA PRP main body is in glass fiber reinforced ABS. Rotary level indicator SOLIBA PRA paddles are inoxidable.
The detection paddle is rotated by a motor. When the paddle is covered with product, the rotation is stopped, the signal is cut and the engine stops. When the level of bulk products decreases, the paddle is released, the signal is restored and the engineer starts. Different paddles and process connections are available according to each product and tank size.
For more information about rotary paddle level sensor SOLIBA PRP, download the following datasheets:
